Wuxi FSK Transmission Bearing Co., Ltd fskbearing@hotmail.com 86-510-82713083
For Argo all-terrain vehicle owners, the stability of the drivetrain directly determines how well the machine performs across difficult terrain. As vehicles age, axle bearing wear and seal failure are common maintenance issues. The K-138SBA-AM aftermarket repair kit is designed for Argo models produced between 1993 and 2009, offering a high-compatibility, durable bearing replacement solution for demanding operating conditions.
The K-138SBA-AM kit includes essential bearing components and a new outer flange fitted with a pre-loaded seal, which simplifies the repair process. According to the product information, the kit is suitable for all center axle positions and addresses problems such as increased clearance and seal failure caused by bearing aging.
| Component | Specification or description |
|---|---|
| 810-113 (OEM) | 1.25-inch heavy-duty axle bearing |
| 101-35AM (aftermarket) | 1.25-inch outer bearing |
| 101-41AM (aftermarket) | 1.0-inch inner bearing |
| 605-89 cork gasket | Two-piece set |
| 605-97 outer flange | With seal, supports grease maintenance |
The inclusion of the sealed outer flange is intended to reduce installation steps while maintaining protection against contamination. The kit is positioned as a direct replacement option for older bearing assemblies that no longer hold proper clearance or sealing performance.
The kit is broadly compatible with a range of Argo ATV models from the 1993-2009 production period. It can be used at either front or rear axle positions, whether or not the vehicle is equipped with bearing extensions. The main applicable models listed for the kit are as follows:
Because the kit is sold per axle position, owners planning a full vehicle service should purchase the corresponding number of kits based on the number of axles requiring replacement.
During replacement, the original inner flange and related hardware must be retained. For secondhand vehicles, the existing bearings should be checked first to determine whether they have already been upgraded to a heavy-duty style, so that the replacement kit matches the current configuration.
For older models produced before 1990, the manufacturer’s official parts manual should be consulted for comparison and confirmation. The kit is supplied for a single axle position, and the quantity should be adjusted according to the actual number of axles to be serviced.